ILER 40 / 4-5W QRP SSB Monoband Transceiver KIT

Written By EA3GCY

ILER QRP KIT HAM RADIO TRANSCEIVER SSB CW EA3GCY VXO TRX QRZ QSL

40m Band. Stable VXO and very low courrent, less than 35mA (no signal) RX, 800mA TX. 4-5W out. PCB 100x120mm / 155 grams, heatsink included (no box).



ILER-40 SPECIFICATIONS

GENERAL:

  • Frequency Coverage: VXO tuning 20 a 100KHz segment in 40M band (60-70KHz for better stability). Bandwidth range is selected according L6 value in the VXO circuit. (ILER-DDS optional).
  • Frequency Control: high stability VXO oscillator.
  • Option A: two 12.031MHz. crystals (upper limit aprox. 7.105MHz)
  • Opción B: one 12.098MHz. crystal (upper limit aprox. 7.185MHz)
  • Variable capacitor tuning (polyvaricon).
  • Antenna: 50 ohms.
  • Power: 12-14VDC, 35mA receive (no signal), 100mA máx. receive. 900mA on transmit.
  • Parts: 51 resistors, 77 capacitors, 3 adjust resistors, 1 trimmer capacitor, 1 potenciometer (volume), 9 IC's, 8 transistors, 12 inductors, 6 RF transformers, 1 variable capacitor tuning, 7 crystals.
  • Controls: tuning, volume, RX switch attenuator
  • Connectors: micro/ptt, phone jack, antenna, DC in.
  • Board size: 100x120 mm.

TRANSMITTER:
  • RF Output: 4 - 5W (12-14V)
  • 2º harmonic output: -45dB.
  • Other spurios signals: -50dB or better.
  • Carrier suppressión: better than -35dB
  • T/R Switching: PTT Relay.
  • Mike preamp & passband.
  • Mike type: dynamic, 600 ohms (no included).

RECEIVER:
  • Type: single conversion Superheterodyne. Balanced Mixer.
  • Sensitivity: 0.200uV mínimum discernible signal.
  • Selectivity: 4 pole crystals ladder filter (2,2KHz nominal bandwidth).
  • FI Frequency: 4.915MHz. 
  • SSB Audio Preamp and audio CAG (ILER-CAG module included).
  • Audio output: 250mW @ 8ohms.

ILER-40 SSB QRP 40M Transceiver. Upper limit 7.105MHz 65,00€ NO STOCK (VAT-IVA not included)


ILER-40 SSB QRP 40M Transceiver. Upper limit 7.185MHz 65,00€ NO STOCK (VAT-IVA not included)




Descargar: manual en español           Download: english manual